Reply

walbro carby settings PRD 100cc

« Prev
1
Next »

outlaw19 DKRT Official YOU did what?[Mo0:0] Posts: 338	walbro carby settings PRD 100cc Dec 14, 2009 20:24:30 GMT 9.5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by outlaw19 on Dec 14, 2009 20:24:30 GMT 9.5 Would anyone have an idea of the base settings for high and low mixture settings on a PRD Piston Port 100cc air cooled engine
	Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you Oval Track The Place To Be

tom DKRT Official Technical Professional [Mo0:0] Posts: 323	walbro carby settings PRD 100cc Dec 16, 2009 16:05:24 GMT 9.5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tom on Dec 16, 2009 16:05:24 GMT 9.5 Just got back info from a mate in NSW that used to race them, his advice is to start at 1&3/4 turns on the low, and 1/2 on the high..

outlaw19 DKRT Official YOU did what?[Mo0:0] Posts: 338	walbro carby settings PRD 100cc Dec 17, 2009 7:18:08 GMT 9.5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by outlaw19 on Dec 17, 2009 7:18:08 GMT 9.5 thanks tom thtas going to help a lot
	Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you Oval Track The Place To Be

tom DKRT Official Technical Professional [Mo0:0] Posts: 323	walbro carby settings PRD 100cc Dec 17, 2009 13:29:21 GMT 9.5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tom on Dec 17, 2009 13:29:21 GMT 9.5 No worries mate, those motors are pretty scarce in SA, but if you need any extra info on them contact St. George kart centre, Chris Dell in particular is always happy to give good advice.

Reply

Quick Reply