|
|
Post by thomas40 on Sept 5, 2013 11:33:24 GMT 9.5
Would someone be able to explain to me how I detach throttle cable from carb on a lepoard 125
Any help much appreciated
|
|
|
|
Post by tom on Sept 10, 2013 21:10:12 GMT 9.5
There are a few different ways to connect the throttle cable to the shaft on a leopard. The standard fitting is just waiting to break, but the cable can be disconnected easily. Remove the clamp from the pedal end, then push the cable back towards the motor and it will come out of the shaft fitting. If someone has modified the shaft fitting, you might have to remove the entire cable with the motor, or slide it all the way back out.
|
|
